TNC pin angle connector G1 (RG-58C/U), G5 (RG-223/U), soldering/assembly

TNC pin angle connector for cables group G1 (RG-58C/U), G5 (RG-223/U), soldering/assembly IP 67

Materials and coatings

Center contact: NiP Au coated copper alloy
External contact: brass coated with Cu2Ni5
Spring washer: copper alloy coated with Cu2Ni5
Other metal parts: brass coated with Cu2Ni5/CuSnZn
Dielectric: PTFE
Gasket: silicone seal, NBR

Electrical characteristics

Wave resistance: 50 ohms
Frequency range: 0 - 6 GHz
Operating voltage: ≤ 500 V, DC, 50 Hz
Resistance to voltage: 1.5 kV, SCZ, 50 Hz
Central contact resistance: ≤ 20 mΩ
External contact resistance: ≤ 5 mΩ
Dielectric resistance: ≥ 5 GΩ

Environment and mechanical properties

Number of connection cycles: > 500
Operating temperature regime: -30 °C / +85 °C
Meets IEC 60169-17 standard

Method of collection

A feature of the connector is the use of a MIL-clamp, which consists in the use of a seal that is cut when the connector nut is clamped. During cutting, a characteristic sound is heard, which is a sign of sufficient tightening torque. Thus, insufficient or excessive tightening torque of the nut is prevented.

Compatibility

The connector is compatible with cables belonging to the G1 and G5 cable groups:

• 7806A
• 9907
• CNT-195
• HPF 195
• KX15
• LMR-195
• RG-58C/U
• WCX195
• RG-223/U
• RG-400/U