SLL-400 Low loss coaxial cable Ø10mm, 500m reel

Cable design SLL-400 (Selteq Low Loss 400)

Structurally, cable SLL-400 СЃРѕСЃС,РѕРёС, РёР ·:

- one-piece central core with a diameter of 2,74 mm from copper-plated aluminum wire
- internal dielectric made of foamed polyethylene with a diameter of - 7,24 mm
- the first shielding layer of aluminum foil
- second shield layer - 85% tinned copper braid
- outer protective sheath made of polyethylene (PE) with a diameter of 10.2 mm (0.400 ″)

Electrical characteristics of the SLL-400 cable

Wave impedance: 50±2 ohm
Linear capacitance: 78 pF/m
Relative speed: 85%
Shortening factor: 1,1
Shielding efficiency: ≥ 90dB

Attenuation table for SLL-400 cable

Comparison of SLL-400 with RG-213 and RFA-1/2″

Mechanical characteristics of SLL-400 cable

Mounting temperature range: -25…+70^o
Operating temperature range: -40…+85^o
Minimum bending radius: 25,4mm
Re-bending radius: 101,6mm

Packaging and labeling

The cable is marked SELTEQ SLL-400 50OHM RG8/U

The cable is securely packed on a wooden drum. Packing norm - 500 m.
On request, the SLL-400 cable can be cut to shorter lengths.

Compatibility and analogues

The SLL-400 coaxial cable is part of the G37 cable group and is analogous in size to the following widely used types of RF coaxial cables: RG8/U, TZC 500 32, LMR 400, MRC 400, Low Loss 400, RG-213-RT5, RG- 214, WBC-400, WCX 400, SPEEDFOAM 400, 8D-FB, PK-50-7-xx.

Connectors and grounds for SLL-400 cable:

Connector N (male) for SLL-400, solderless threaded assembly
Connector N (male) for SLL-400, crimp assembly
Angled connector N (male) for SLL-400, crimp assembly

Earthing switch for cable UEK 1M