SLL-400-FPG Low loss coaxial cable, flexible, oil, 500 m drum

SLL-400-FPG cable design

Structurally, cable SLL-400-FPG consists of:

– multi-core inner conductor, with 7x0,97 mm copper conductors with a total diameter of 2,9 mm
– internal dielectric made of three-layer high-pressure foamed polyethylene, diameter – 7,3 mm
– first shielding layer of copper with a layer of PE film
– second shielding layer – braid of 144 copper wires with 71% fill
– outer protective sheath made of UV-resistant PVC, olive color, diameter 10.3 mm (0.400 “)

Electrical characteristics of the SLL-400-FPG cable

Wave resistance: 50±2 Ohm
Line capacitance: 78 ±2pF/m
Relative speed: 83%
Shielding efficiency: > 105 dB (100-2000 MHz)

Attenuation table for SLL-400-FPG cable

Mechanical characteristics of the SLL-400-FPG cable

Temperature range: -40…+60^o
Minimum bending radius: 40 mm
Re-bending radius: 80 mm

Packaging and labeling

The cable is marked SLL-400-FPG SELTEQ LOW LOSS 400 FLEX * 50 OHM

The cable is securely packed on a wooden drum. The standard of packaging is 500 m.
Upon request, the SLL-400-FPG cable can be cut into shorter lengths.

Compatibility and analogues

The SLL-400-FPG coaxial cable is part of the G58 cable group and is an analogue of the following RF coaxial cables: SLL-400-SF, SLL-400-SFP, SLL-400-FP.