Nova Poshta or pickup from our warehouse
RFA 1/2″-50 cable design
Structurally, the RFA 1/2″-50 cable (feeder) consists of:
- central conductor: copper wire with a diameter of 4,8 mm.
- dielectric: foamed polyethylene with a diameter of 12,1 mm
- outer conductor: corrugated copper tube with a diameter of 13,9 mm.
- protective shell: black, halogen-free polyethylene, 16 mm in diameter.
A unique feature of RFA series cables is a two-layer protective sheath consisting of a hard surface layer of HDPE and a softer layer of LDPE. This design provides the best protection for all operational influences without reducing the flexibility of the cable.
In addition, the foamed dielectric has an extremely high level of expansion and a special surface layer for additional protection.
Electrical characteristics of RFA 1/2″-50 cable
Wave resistance: 50±1 Ohm
Linear capacitance: 77,5 pF/m
Relative speed: 86%
Maximum frequency: 9800 MHz
Peak working HF voltage: 1,8 kV
Peak working power: 32 kW
Direct current resistance:
- internal conductor: 1,55 Ohm/km
- external conductor: 2,66 Ohm/km
Frequency characteristics of RFA cable 1/2″-50
| Frequency, MHz | Attenuation, dB/100m | Power, kW |
| 25 | 1,06 | 7,6 |
| 88 | 2,01 | 4,0 |
| 144 | 2,58 | 3,1 |
| 174 | 2,85 | 2,8 |
| 400 | 4,40 | 1,8 |
| 800 | 6,36 | 1,24 |
| 900 | 6,8 | 1,17 |
| 1800 | 9,9 | 0,79 |
| 2000 | 10,5 | 0,75 |
| 2400 | 11,6 | 0,68 |
| 5800 | 19 | 0,41 |
| 7000 | 22 | 0,36 |
| 8000 | 23 | 0,33 |
| 9000 | 25 | 0,31 |
| 9800 | 27 | 0,29 |
Mechanical characteristics of RFA 1/2″-50 cable
Linear weight: 0,22 kg/m
Maximum tension force: 2000 N
Minimum bending radius, single: 70 mm
Minimum bending radius, repeated: 120 mm
Operating temperature range: -55...+85° C
Resistance to damage: 1,80 kg/mm
Bending moment: 4 Nm
Recommended distance between fasteners: 1 m.
The RFA 1/2″ feeder is available in non-flammable black (suffixed BHF) and gray (suffixed GHF) colors. The non-flammable black version has additional UV protection.
Weight and dimensions of the drum:
| Cable type | The length of the cable on the drum | Outer diameter of the drum | Drum width | Weight of empty drum | Weight of drum with cable |
| RFA 1/2″ | 500 m | 114 см | 55 см | 43 kg | 175 kg |
1/2″ NKRFA01200 Coaxial Cable Specification
1/2″ Coaxial Cable Transportation and Storage Instructions NKRFA01200
Sample passport of the drum with individual parameters of factory testing NKRFA01200
1/2″ coaxial cable is widely used in GSM, DCS, CDMA, 3G WCDMA, MPT, TETRA, WiFi, WiMAX networks. A small diameter and a sufficient level of flexibility allows you to use the cable for direct connection to the antenna using vch connector.
Size analogues with RFA 1/2″-50 cable are: LCF 12-50″, LDF4 50A, Eupen 5128, HPL50-1/2, HFC-1/2″, 10D-SFCR.
1/2″ Feeder Processing Tool
Earther for feeder 1/2″
Cable fastening (clamps) for feeder 1/2″
Connector for feeder 1/2″
Reviews
There are no reviews yet.