PPS3 Input for RF cable

Materials and coatings

1. Stainless steel plate
2. Black EPDM gasket
3. Removable protective film
4. Stainless steel clamp (FAS)

Mechanical characteristics

Complies with standards: IEC 60529, IP67, RoHS 2002/95/EC
Fire resistance class: REI 120, EN 1366-3:2009

Geometric indicators

Number of holes: 3 x Ø90
H: 150 mm
L: 450 mm
Wall holes: 3 x Ø 90 (round) and 90 x 390 (rectangular)
Vaga: 1400 g

The diameter of each feeder input hole is 90 mm. Each hole must be filled with sector inserts (either 90-degree or 180-degree). Sector inserts have holes that exactly match the diameter of standard radio communication cables (7/8″; 1/2″; RG214, etc.)

The set includes: AISI 304 stainless steel plate, rubberized coating with holes for inserting sector gaskets, tightening rings, dowels and 2 tubes of silicone.

Sector spacer inserts are not included in the PPS3 kit and must be ordered separately.

The frame of the seal contains 2 threaded holes at a distance of 225 mm from each other, which are used for docking with ground terminal. BEI terminal block (61 1517 9350) has 9 holes of 8 mm.

Recommended mounting holes in the wall (container) – 92 mm. The distance between the centers of adjacent holes should be 150 mm. Holes for dowel fastening - 8 mm.