N pin connector, field installation for feeder 1/2″
Materials and coatings
Center contact: silver plated brass
External contact and housing: brass with three-layer metal coating
Dielectric: fluoroplastic
Sealant: PMP (polymethylpentene)
Nut: nickel-plated brass
Electrical characteristics
Wave resistance: 50 ohms
Insulator resistance: ≥5000 MΩ
Center contact resistance: ≤1,00 mΩ
External contact resistance: ≤0,25 mΩ
Dielectric test voltage: 2000 V (SCZ)
Made losses:
≤0,10 dB in the range of 0,69-0,96 GHz
≤0,15 dB in the range of 1,7-2,7 GHz
≤0,20 dB in the range of 2,7-3 GHz
≤0,25 dB in the range of 3-5 GHz
VSWR:
≤1,10 in the range of 0,69-0,96 GHz
≤1.13 in the range of 1,7-2,7 GHz
≤1.15 in the range of 2,7-3 GHz
≤1.20 in the range of 3-5 GHz
Environment and mechanical properties
Number of connection cycles ≥500
Impact loads according to standards: IEC 60068-2-27/GB/T 2423.5
Vibration loads according to standards: IEC 60068-2-6/GB/T 2423.10
Salt mist according to standards: IEC 60068-2-11/GB/T 2423.17(48H)
Temperature range: from -45 ° C to +85 ° C
RoHS Compliant
Degree of protection: IP68
Compatibility
The connector is compatible with corrugated cables (feeders) RFA-1/2″-50, SLT-1/2″-50.
Reviews
There are no reviews yet.