N male connector, field mount for RG-8/U cable
Materials and coating
Central contact: gold plated brass
External contact and housing: nickel plated brass
Seal: silicone rubber
Nut: nickel plated brass
Wave impedance: 50 ohm
Insulator resistance: ≥5000MΩ
Center contact resistance: ≤1,00mΩ
External contact resistance: ≤0,25mΩ
Dielectric test voltage: 2000 V (RMS)
Insertion loss: ≤0,15dB in the range of 0,3-2,2GHz
≤0,20 dB in the range of 2,2-2,7 GHz
VSWR: ≤1,15 in the range of 0,3-2,2 GHz
≤1.20 in the range of 2,2-2,7GHz
Environment and mechanical properties
Number of connection cycles ≥500
Shock loads according to standards: IEC 60068-2-27/GB/T 2423.5
Vibration loads according to standards: IEC 60068-2-6/GB/T 2423.10
Salt fog standards: IEC 60068-2-11/GB/T 2423.17(48H)
Temperature range: -45°C to +85°C
Degree of protection: IP67
The connector is compatible with cables of group G37 with a solid center conductor: SLL-400, RG-8/U, TZC 500 32, LMR-400, MRC 400 and similar.
Assembly and connection
The connector is designed for field installation with a minimum set of tools.
Does not require soldering. To assemble the connector, open-end wrenches of 15 and 16 mm are used.
To tighten the union nut, an 18 mm wrench or hand tighten is required.
Union nut thread: 5/8-24 UNEF-2B (in., standard for N-type connectors)